No products in the cart.
Showing 1–12 of 83 results
Attributes of Battery V Checker/Buzzer 1-8s Specifications: Detection of 1S-8S lithium battery Voltage detection precision: 0.01V. Sets of voltage display range: 0.5V~4.5V Total voltage display range: 0.5V~36V 1S test mode voltage range: 3.7V~30V Low voltage buzzer alarm mode 2S – 8S Alarm voltage setting range: OFF~2.5~3.8V Weight=16g Description: This Battery V Checker is used to…
Attributes of 2.1mm Push Rod Linkage Stopper Specifications: 2.1mm Posh Rod Linkage stopper weight=1g Product Description: Push Rod Linkage stopper Servo Connectors D2.1mm RC Airplanes Plane Remote Control Helicopter. Item: Linkage Stoppers D2.1mm Click Here For More Products.
Attributes of 2.1mm Push Rod Linkage Stopper Specifications: 2.1mm Posh Rod Linkage stopper weight=1g Product Description: Push Rod Linkage stopper Servo Connectors D2.1mm RC Airplanes Plane Remote Control Helicopter. Item: Linkage Stoppers D2.1mm Click Here For More Products.
Attributes of 2.1mm Push Rod Linkage Stopper Specifications: 2.1mm Posh Rod Linkage stopper weight=1g Product Description: Push Rod Linkage stopper Servo Connectors D2.1mm RC Airplanes Plane Remote Control Helicopter. Item: Linkage Stoppers D2.1mm Click Here For More Products.
Attributes of 2mm Gold Bullet Connector Specification: Diameter: 2.0mm Length:1.5CM & 1.5CM Amperage Rating: 60A -180Amps Hook up RC Battery to Electronic Hook up the Brushless motor to the electronic speed control These have low resistance and give the best electric flow 100% Brand New Quantity: 5 / 10 / 20 / 50 / 100…
Attributes of 3.5mm Gold Bullet Connector Specification: Diameter: 3.5mm Length:1.5CM & 1.5CM Amperage Rating: 60A -180Amps Hook up RC Battery to Electronic Hook up the Brushless motor to the electronic speed control These have low resistance and give the best electric flow 100% Brand New Quantity: 5 / 10 / 20 / 50 / 100…
Attributes of 3.7g Micro Servo Specifications: Item Name: 3.7g Servo Speed: 0.12s/[email protected] (no load running) Torque: 0.6kg*[email protected] Weight: 3.7g (without connector) Power: 3.7v -7v Working Current: <280MA (4.8V) Description: This generic sub-micro servo is one of the lightest servos we carry, weighing just 3.7 g (0.13 oz) without the lead. It is intended for use between…
Carbon fiber rods and tubes are manufactured by pulling or wrapping carbon fibers and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Great selection of Rectangular and Round Carbon Fiber Rods.
Machining Tips: To cut carbon fiber use an abrasive cutoff wheel or 32 teeth per inch hacksaw. Do not use a band saw.
Pultruded in an epoxy resin, Dragon-Plate Carbon Fiber Rods are exceptionally straight and rigid and are an ideal building material for frames, trusses, and for use as reinforcing material. Because rods are fundamental building blocks, they find great utility in the building of engineering and high-performance structures and work well in concert with Dragon-Plate Carbon Fiber Laminate. Dragon-Plate Carbon Fiber Rods are easy to work with. They can be cut with a band saw, coping saw, scroll saw, end mill, or Dremel tool. Because Dragon-Plate Carbon Fiber Rods are pultruded in an epoxy matrix they will bond readily with Scotch-Weld 2216 epoxy resin.
Carbon fiber rods and tubes are manufactured by pulling or wrapping carbon fibers and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Great selection of Rectangular and Round Carbon Fiber Rods.
Machining Tips: To cut carbon fiber use an abrasive cutoff wheel or 32 teeth per inch hacksaw. Do not use a band saw.
Pultruded in an epoxy resin, Dragon-Plate Carbon Fiber Rods are exceptionally straight and rigid and are an ideal building material for frames, trusses, and for use as reinforcing material. Because rods are fundamental building blocks, they find great utility in the building of engineering and high-performance structures and work well in concert with Dragon-Plate Carbon Fiber Laminate. Dragon-Plate Carbon Fiber Rods are easy to work with. They can be cut with a band saw, coping saw, scroll saw, end mill, or Dremel tool. Because Dragon-Plate Carbon Fiber Rods are pultruded in an epoxy matrix they will bond readily with Scotch-Weld 2216 epoxy resin.
Attributes of Foam Wheel 40mm Description: Foam Wheel 40mm These foam wheels utilize a 0.625” hub pattern. To adapt these wheels to other Servo City components (clamping hubs, servo hubs, etc.) that have the 0.770” pattern you will need to purchase the .770 – .625 Hub Adaptor. flying machine. It’s built with a lightweight, durable,…
Attributes of Foam Wheel 40mm Description: Foam Wheel 40mm These foam wheels utilize a 0.625” hub pattern. In order to adapt these wheels to other ServoCity components (clamping hubs, servo hubs, etc) that have the 0.770” pattern you will need to purchase the .770 – .625 Hub Adaptor. *The price is for single wheelweight=2g Click…
Gray Plastic Hub Black Foam Wheel 55mm Diameter for RC Aircraft Model RC Plane Wheel. Material: Foam, Plastic Color : Black, Gray; Wheel Size : 55 x 19 mm Hole Diameter : 3 mm These foam wheels utilize a 0.625” hub pattern. To adapt these wheels to other Servo City components (clamping hubs, servo hubs, etc.)…