Universal 3D Printed Motor Mount 28mm/35mm For 22 Series 2212 2208 2217 2216 Brushless Motor
1 × ₹79.00Subtotal: ₹79.00
Showing 13–24 of 81 results
Attributes of Carbon Fiber Plates 1mm 3mm 500mm Specification of Carbon Fiber Plates 1mm * 3mm carbon sheet Width: 3mm Thick: 1mm Length: 0.5M PLATES (SOLID COMPOSITES) Carbon Fiber, Carbon/Kevlar, and Fiberglass Plates Available Varying thicknesses are available starting at 0.03″ to 1″ Lots of sizes to choose from Fabric and Unidirectional styles Gloss and…
Carbon fiber rods and tubes are manufactured by pulling or wrapping carbon fibers and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Great selection of Rectangular and Round Carbon Fiber Rods.
Machining Tips: To cut carbon fiber use an abrasive cutoff wheel or 32 teeth per inch hacksaw. Do not use a band saw.
Pultruded in an epoxy resin, Dragon-Plate Carbon Fiber Rods are exceptionally straight and rigid and are an ideal building material for frames, trusses, and for use as reinforcing material. Because rods are fundamental building blocks, they find great utility in the building of engineering and high-performance structures and work well in concert with Dragon-Plate Carbon Fiber Laminate. Dragon-Plate Carbon Fiber Rods are easy to work with. They can be cut with a band saw, coping saw, scroll saw, end mill, or Dremel tool. Because Dragon-Plate Carbon Fiber Rods are pultruded in an epoxy matrix they will bond readily with Scotch-Weld 2216 epoxy resin.
Carbon fiber rods and tubes are manufactured by pulling or wrapping carbon fibers and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Great selection of Rectangular and Round Carbon Fiber Rods.
Machining Tips: To cut carbon fiber use an abrasive cutoff wheel or 32 teeth per inch hacksaw. Do not use a band saw.
Pultruded in an epoxy resin, Dragon-Plate Carbon Fiber Rods are exceptionally straight and rigid and are an ideal building material for frames, trusses, and for use as reinforcing material. Because rods are fundamental building blocks, they find great utility in the building of engineering and high-performance structures and work well in concert with Dragon-Plate Carbon Fiber Laminate. Dragon-Plate Carbon Fiber Rods are easy to work with. They can be cut with a band saw, coping saw, scroll saw, end mill, or Dremel tool. Because Dragon-Plate Carbon Fiber Rods are pultruded in an epoxy matrix they will bond readily with Scotch-Weld 2216 epoxy resin.
Attributes of Control Horns with Screws Specification: Pin Horns 17.5x26mm With Screws(2x14mm) Size: L17.5xW13xH26mm Hole Diameter : 1.5mm Weight : 1.5g(1Set) Packing : 10Set/Pack Screw size: 2 X 14mm weight=1.5g Description: Pin Horns 4 holes. Comes with 4 screws. These are quality horns made for RC planes of various sizes. These horns are used to control…
Attributes of Control Horns With clevis Lock on nylon control horns for ailerons, elevators, rudders, and similar applications.The backplate pushes over the serrations on the horn and locks it into place, no need for glue.Nylon clevis for threaded or push-fit rods.It has a shaft on the side for a 2mm grub screw for secure fixing….
Attributes of Control Horns with Screws Specification: Pin Horns 17.5x26mm With Screws(2x14mm) Size: L17.5xW13xH26mm Hole Diameter : 1.5mm Weight : 1.5g(1Set) Packing : 10Set/Pack Screw size: 2 X 14mm weight=1.5g Description: Pin Horns 4 holes. Comes with 4 screws. These are quality horns made for RC planes of various sizes. These horns are used to control…
Attributes of Control Horns without Clevis Lock on nylon control horns for ailerons, elevators, rudders, and similar applications. The backplate pushes over the serrations on the horn and locks it into place, no need for glue. Without Clevis. Specification: Control horn Length of Horn from Base: 18mm Max Thickness of Control Surface: 6mm Length of…
Description: CCPM Servo Consistency Master / Servo Tester The device can also be used as a signal generator for an electric speed controller (ESC), then you can test your motor system without a transmitter and receiver. There are 3 modes to check Servo Esc Tester Circuit: Manual mode: turn the knob at a different speed, and…
Eachine ROTG01 UVC receiver is a new receiver that you can connect to your smartphone directly instead of the heavy monitor and is good for those who feel dizzy when wearing FPV goggles. It has low latency around 100ms .150CH auto search allows it to cover all 5.8G frequency bands. One-screen display and double-screen display are switchable.
Attributes of 64mm Ducted Fan EDF Unit for RC Model Jets(Without Motor) Specifications: Item Name: 64 mm Duct Fan for Jets Weight: 25g Motor Dimensions (Diameter x Length): 26mm x 47.5mm (Not Included) Ducted Fan Exterior Dimensions (Diameter x Length): 66mm x 41mm Ducted Fan Interior Dimensions (Diameter x Length): 64mm x 41mm 5-Blade propeller…
Attributes of Emax ES3103E Servo 17g Specifications: Brand Name: Emax Item Name: ES3103 Analog Servo Operating Voltage: 4.8-6.0V Torque: 2.5kgf.cm at 4.8V,3.0kgf.cm at 6V Speed: 0.14sec/60 at no load at 4.8V, 0.12sec/60 at no load at 4.8V Size: 28.2×12.8x27mm Weight: 17g Plug Available: FUT, JR Package Included: 1 x ES3103 Analog Servo, weight=17g Features: Emax…
Attributes of F450 M3*8 Description: M3 Screws for Quad-Copter/Drone Frame Size: M3 Length:8mm Weight:0.5g Click Here For More Products